Setting up cattery webcams – so owners can watch from anywhere
Putting a camera in a chalet is the easy part. Making it reliable, reachable from an owner's phone on holiday, and private to that owner takes a bit more thought. This is the practical side – what to buy, how to connect it, and how to keep it secure.
Updated November 2026. General guidance, not technical advice – if in doubt, ask a local CCTV installer to do the network side.
Every camera live on one screen, and owners' logins kept with each chalet – webcams run from Cattery Booking.
The short version
- Use wired IP cameras – one per chalet, powered through the network cable if you can.
- Give each camera a view-only login of its own, and keep the admin password to yourself.
- Decide how owners reach it – the maker's app, or your router passing it through.
- Prefer a still picture every few seconds to live video – it's lighter and more reliable.
- Check your upload speed, and keep the cameras updated.
Wired, not wi-fi
Wi-fi cameras are cheap and quick to fit, but a cattery is a hard place for wi-fi: long blocks, metal mesh, outbuildings and thick walls. A camera that keeps dropping out is worse than none, because owners notice. A network cable to each camera is far more reliable – and most IP cameras can take their power through the same cable (called PoE, power over ethernet), from a PoE switch in the office. One cable per chalet, no plugs in the chalet, nothing for a cat to chew.
If you already have a CCTV recorder (an NVR), check whether owners would see one camera only – some recorders make it hard to give out a login for a single channel. Standalone IP cameras, each with its own login, are simpler for this job.
A login per camera
- Change the default admin password the day you fit it – and never give it to owners.
- Most IP cameras let you add extra users who can only view. Make one "viewer" user on each camera, and give the owner that one.
- Change the viewer password when the cat goes home, so the last owner can't keep watching. A simple pattern – the cat's name and the arrival date – is fine for a short stay; just never reuse one.
- Keep the list of cameras, addresses and current logins in one safe place your staff can reach – your booking system is ideal.
How owners reach the camera
A camera on your network can be seen from inside the cattery straight away. Seeing it from a beach in Spain needs one of these:
- The maker's cloud app. The camera connects out to the maker's service, and owners use the maker's app. Nothing to change on your router, but each owner needs the app and an account, and you depend on the maker's service.
- Your router passing it through (port forwarding). Each camera gets its own port on your internet address – for example
81.2.3.4:8081for chalet 1,:8082for chalet 2. It works from any browser, with no app. You need an internet address that doesn't change (ask your provider for a static IP) or a dynamic DNS name, and the cameras must be kept updated, because they're open to the internet. - Through your booking system. Your system fetches a still picture from each camera and shows it to the owner on their own booking page – the camera's login never reaches the owner's phone. The camera still needs to be reachable from the internet, as above.
Test it properly: turn wi-fi off on your phone and try the camera on mobile data. If it only works on the cattery's wi-fi, owners won't be able to see it.
Still pictures or live video?
Most owners want to see their cat is fine, not watch it for an hour. A still picture that refreshes every few seconds:
- works in any browser, on any phone, without an app or plug-in
- uses a fraction of the internet upload that live video does
- keeps working on a slow connection, where video stutters and stops
Most IP cameras give a still picture (a "snapshot") at a fixed address. A few common ones:
| Camera | Still picture address (after the camera's address) |
|---|---|
| Hikvision | /ISAPI/Streaming/channels/101/picture |
| Dahua, Amcrest | /cgi-bin/snapshot.cgi |
| Reolink | /cgi-bin/api.cgi?cmd=Snap&channel=0 plus the login |
| Axis | /axis-cgi/jpg/image.cgi |
Models and firmware differ – check your camera's manual or the maker's support pages. Cameras that only work through the maker's app (many cheap wi-fi ones) don't offer a snapshot address at all.
Your internet upload speed
Broadband is sold on its download speed, but cameras use upload – and rural lines often have very little. Run a speed test in the office and look at the upload figure. As a rough guide, one live HD video stream can use 1–4 Mbps of upload; a still picture every few seconds uses a small fraction of that. With six cameras and a busy August, live video can fill a 10 Mbps upload on its own – which also slows your card machine and email. Lower the camera's resolution or frame rate for the owners' stream if you need to.
Keep them secure
- Update each camera's firmware when the maker releases one – cameras open to the internet are a favourite target.
- Turn off features you don't use, especially anything called UPnP or P2P on the router and cameras if you're forwarding ports yourself.
- Point each camera at its chalet only – not the corridor, the office or the house.
- Read the data protection side before the cameras go live: signs, staff, and how long anything is kept.
Every morning
Look at every camera once as part of the morning round – a screen showing all of them at once makes it a ten-second job – and restart any that have stopped before an owner notices. If one can't be fixed today, tell the owner and send a photo instead.
Related: cattery webcams – the overview · CCTV, webcams and data protection · terms and conditions template (with a webcam clause) · daily sheet
Please note
This is general information written in November 2026, not technical, security or legal advice. Follow your camera maker's instructions, and use a qualified installer for anything you're unsure about. Spotted something you disagree with? Let us know.